Replacement Pickups for Rickenbacker® Bass
Our Classic RickTM replacement bass pickups deliver the unique tone of vintage Rickenbacker® bass pickups, we build ours to get that vintage tone but also solving two major problems inherent in vintage OEM pickups like the balance between 1st/4th strings -vs- 2nd/3rd strings and have acheived string balance with no need for adjustable poles, and the age-old lame output problem with vintage (OEM) pickups. We use much better magnet grade than the weak OEM magnet (aka; refrigerator magnets), individual magnets for each pole allowing for much better string balance and tone articulation, rather than the OEM approach of over-winding (and consequently changing the tone) the pickup trying to increase output. We use a much better (lead) cable connection method replacing that old funky bare lead ends and solder joints (ie; hum antennas) of the OEM style wiring under the pickups, we use an assembly technique where the signal wires run fully shielded all the way to the pickup coil for the lowest possible stray hum/noise as can be seen in the picture above.
Scatter-wound with #44 wire on hand made FR4 bobbin cores, made in-house, standard vintage replacement wind for Classic RickTM Treble/Bridge is 8.2K -to- 8.6K DCR*, standard vintage replacement wind for Classic RickTM Bass/Neck is 7.6K - 8K DCR*.
*With #44 wire the DCR can vary this much depending on the current room temperature
we wind by turns-count which makes the pickup output and sound consistant.With our pickups installed in your vintage Rickenbacker® you can finaly keep up with modern instruments while retaining that classic tone, and for your modern Rickenbacker® bass you can finally get that vintage tone you likely bought it for, but found lacking!.
Classic Rick Treble/Bridge
pickup for 4001 & 4003
RB4X-BR
Treble/Bridge pickup
£ 160.00 GPB
Free UK shipping, International shipping £15.00
Send me email if you want me to build you a Treble/Bridge pickup:
International Currency Conversion:
Xe Global currency conversion
www.calculator.net
Classic Rick Bass/Neck
pickup for 4001 & 4003
RB4X-NK
Neck/Bass pickup
£ 130.00 GPB
Free UK shipping, International shipping £15.00
Send me email if you want me to build you a Bass/Neck pickup:
International Currency Conversion Calculators:
Xe Global currency conversion
www.calculator.net
Classic Rick Pickup Set
for 4001 & 4003
RB4X-SET
Bridge and Neck Pickup set, RWRP£ 240.00 GPB
Free UK shipping, International shipping £15.00
Send me email if you want me to build you some pickups:
International Currency Conversion Calculators:
Xe Global currency conversion
www.calculator.net
Download wiring-hookup diagrams:
ClassicRickHookup-mono.pdf
ClassicRickHookup-stereo.pdf
Read Customer Comments
NOTICE:
RIC® and Rickenbacker® are registered trademarks of
Rickenbacker International Corporation
Classic Amplification is not affilliated with
Rickenbacker International Corporation
or their trademarks in any way
